Antimicrobial Textile Testing: Methods, Standards, and Compliance Applications
Antimicrobial textile testing is a laboratory evaluation used to assess the effectiveness of antimicrobial treatments applied to textile materials. These treatments are designed to inhibit the growth of bacteria, fungi, and other microorganisms that can cause odors, material degradation, hygiene concerns, and potential health risks. Antimicrobial finishes are widely used […]
A Step-by-Step Guide to Quality Inspection Across the Supply Chain
Quality inspection is a structured quality control process designed to verify that products meet defined specifications, regulatory requirements, and customer expectations throughout the manufacturing and shipping lifecycle. By applying inspection at key production stages, manufacturers, importers, and brand owners can reduce defect rates, prevent shipment disputes, and maintain consistent product […]
What Is Hardness Testing? Methods, Standards, and Applications
Hardness testing is a widely used material evaluation method that measures a material’s resistance to localized plastic deformation, typically caused by indentation, penetration, or impact. In industrial practice, hardness values are used as practical indicators of material condition, processing quality, and consistency across production batches. Because hardness testing is efficient, […]
What is Children’s Product Certification (CPC)
Children’s Product Certification, commonly referred to as CPC, is a legally required compliance document under United States federal law for products that are designed or intended primarily for children aged 12 years or younger. It is mandated by the Consumer Product Safety Commission (CPSC) and established under the Consumer Product […]
Packaging Drop Testing
Packaging drop testing is a physical performance test that evaluates how a complete packaging system protects its contents when exposed to controlled free-fall impacts. It assesses how impact energy is absorbed, transferred, and distributed through the outer container, internal cushioning, and structural components to determine whether the packaging can protect […]
Toy Safety Testing Checklist
Toy safety testing is structured around hazard-based evaluation rather than a fixed checklist. The specific tests applied to a toy depend on its design, materials, function, age grading, and foreseeable use. As a result, two toys within the same category may be subject to very different test scopes. This article […]
Japan PSE Mark Certification
Japan PSE Mark compliance is a mandatory electrical safety requirement for designated electrical products supplied to the Japanese market. The system is established under the Electrical Appliance and Material Safety Act (DENAN) and applies to electrical appliances and materials classified as regulated products. Products subject to this regulation must meet […]
Singapore SAFETY Mark Requirement
The Singapore Consumer Protection (Safety Requirements) Regulations (CPSR) are mandatory product safety regulations enacted under the Consumer Protection (Safety Requirements) Act (CPSA). They establish legally binding safety requirements for specific consumer products supplied, advertised, or distributed in Singapore, with the objective of preventing unsafe goods from entering the local market. […]
US CPSC Finalizes Mandatory Toy Safety Requirements for Neck Floats
Published: December 2025Effective Date: 15 June 2026Regulation: 16 CFR Part 1250 – Safety Standard for Toys (Neck Floats) The Consumer Product Safety Commission (CPSC) has published a final rule establishing mandatory safety requirements for neck floats intended for use by infants and young children. Neck floats are aquatic play products […]
US CPSC Introduces Mandatory Safety Requirements for Water Bead Toys
Published: December 2025Effective Date: 12 March 2026Regulation: 16 CFR Part 1250 – Safety Standard for Toys (Water Beads) The Consumer Product Safety Commission (CPSC) has approved new mandatory safety requirements for water bead toys and toys containing water beads under the U.S. Safety Standard for Toys. Water beads are small, […]
Request Free Sample Report