December 23, 2025

Singapore SAFETY Mark Requirement

The Singapore Consumer Protection (Safety Requirements) Regulations (CPSR) are mandatory product safety regulations enacted under the Consumer Protection (Safety Requirements) Act (CPSA). They establish legally binding safety requirements for specific consumer products supplied, advertised, or distributed in Singapore, with the objective of preventing unsafe goods from entering the local market.

The regulations apply to consumer products classified as Controlled Goods. These products must comply with prescribed safety standards, complete the required conformity assessment, and be registered by a Singapore-registered supplier before they may be supplied or advertised in Singapore. Where applicable, registered products must bear the Singapore SAFETY Mark as evidence of compliance.

The SAFETY Mark incorporates a unique 8-digit registration number that is traceable to the Registered Supplier and the registered product models. Registration status can be verified through the official CPSA+ register of registered Controlled Goods. The SAFETY Mark must be affixed to the product, packaging, or rating label in accordance with applicable labeling requirements.

Controlled Goods Under the CPSR

The Consumer Protection (Safety Requirements) Regulations apply only to products classified as Controlled Goods. Singapore currently defines 33 categories of Controlled Goods, covering consumer products assessed as posing higher safety risks and therefore subject to mandatory safety controls.

These categories include, but are not limited to:

Adaptors and plugs
Extension cords and socket outlets
Household electrical appliances
Audio and visual equipment
Power tools
Lighting products
Air conditioners
Water heaters
Video game consoles and accessories

Each Controlled Good category is linked to a specific safety standard that defines the applicable testing and evaluation requirements.

Non-Controlled Goods

Products that do not fall within the 33 Controlled Goods categories are considered Non-Controlled Goods. These products do not require registration or the Singapore SAFETY Mark.

However, Non-Controlled Goods must still be safe for consumer use. Products found to be unsafe may be subject to enforcement action by the consumer product safety authority operating under the Competition and Consumer Commission of Singapore.

Applicable Safety Standards in Singapore

Each Controlled Good category is assigned to a specific safety standard specified under the CPSR framework. These standards are largely aligned with international IEC and EN standards and are adopted for regulatory use in Singapore.

Commonly applied standards address:

Electrical safety for household appliances
Safety requirements for information technology and audio-visual equipment
Power tools and electrical accessories
Lighting products

The exact standard applicable depends on the product category, voltage rating, function, and intended use. Compliance must be demonstrated against the specific standard listed for the relevant Controlled Good category.

How to Comply with Singapore SAFETY Mark Requirements

Businesses supplying Controlled Goods typically follow a structured compliance process.

Step 1: Confirm product classification

Determine whether the product is classified as a Controlled Good under the CPSR framework.

Step 2: Identify the applicable safety standard

Each Controlled Good category is linked to a specific standard defining testing and evaluation requirements.

Step 3: Conduct product testing

Testing must be performed in accordance with the applicable standard, typically by an accredited or recognized laboratory.

Step 4: Complete conformity assessment

Compliance is demonstrated through submission of a Supplier’s Declaration of Conformity (SDoC) or through certification review by a designated Conformity Assessment Body, including assessment of test reports and technical documentation.

Step 5: Register the product

The Registered Supplier submits the required declaration or Certificate of Conformity through the CPSA+ registration system before supply or advertising.

Step 6: Apply the SAFETY Mark

Where required, the SAFETY Mark must be applied prior to placing the product on the market.

How Long Is Singapore SAFETY Mark Registration Valid?

Registration of Controlled Goods under the Consumer Protection (Safety Requirements) Regulations is typically valid for up to three years, or for the validity period of the supporting Certificate of Conformity, whichever is shorter.

To continue supplying the product in Singapore:

The Registered Supplier must renew the product registration before expiry
Updated technical documentation or additional testing may be required
Product changes or manufacturing changes may trigger reassessment

Failure to maintain valid registration results in loss of authorization to supply or advertise the product in the Singapore market.

Responsibilities of the Registered Supplier

Compliance responsibility rests with the Registered Supplier. The Registered Supplier must be a Singapore-registered business entity that places the Controlled Good on the market.

Key obligations include:

Ensuring compliance with the applicable safety standard
Maintaining valid test reports, declarations, and certification records
Applying the SAFETY Mark correctly where required
Ensuring supplied products match the registered configuration
Cooperating with inspections and market surveillance activities

Non-compliance may result in enforcement action, including fines, product recalls, or prohibition from sale.

Enforcement and Market Surveillance in Singapore

The Consumer Product Safety Office conducts market surveillance to verify ongoing compliance. Activities may include:

Product sampling and testing
Documentation and registration checks
Verification of SAFETY Mark usage
Investigation of consumer complaints

Registered Suppliers are responsible for ensuring that products remain consistent with the approved and registered configuration throughout their market lifecycle.

Why Compliance Matters for Market Entry

Compliance with Singapore SAFETY Mark requirements enables:

Legal authorization to supply Controlled Goods in Singapore
Reduced risk of customs, retail, or enforcement action
Increased confidence from distributors and retailers
Alignment with Singapore’s consumer product safety framework

Early confirmation of product classification and preparation of compliance documentation remains the most effective approach for achieving smooth and uninterrupted access to the Singapore market.